User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
The router supports a wide range of SFP optics modules. The following table lists their part numbers. The
operational temperatures supported for the optics are defined by individual SFP or SFP+ modules.
Table 5: SFP Modules Supported
Part NumberType
GLC-LH-SM, GLC-LH-SMD, GLC-EX-SMD, GLC-T,
GLC-ZX-SMD, GLC-LX-SM-RGD, GLC-SX-MM,
GLC-SX-MMD, GLC-SX-MM-RGD, GLC-ZX-SM,
GLC-ZX-SM-RGD, GLC-BX-U, GLC-BX-D, SFP-GE-L,
SFP-GE-S, SFP-GE-Z, SFP-GE-T, GLC-FE-100FX-RGD,
CWDM-SFP-1470, CWDM-SFP-1490,
CWDM-SFP-1510, CWDM-SFP-1530,
CWDM-SFP-1550, CWDM-SFP-1570,
CWDM-SFP-1590, CWDM-SFP-1610, ranging from
DWDM-SFP-3033 to DWDM-SFP-6141 (40 wavelengths)
Ethernet SFP
Product Specifications
The following tables list product, power, and environmental specifications, and safety and compliance
information for the Cisco ASR 901S Series Aggregation Services Router.
Table 6: Cisco ASR 901S Series Aggregation Services Router Specifications
SpecificationsDescription
16 inches high x 11 inches wide x 2.5 inches deep (40.64 cm x 27.94
cm x 6.35 cm)
Dimensions (H x W x D)
•
Approximately 11. 7 lbs. (5.8 kgs [FD chassis model])
•
Approximately14.9 lbs. (6.8 kgs [FA chassis model])
Weight
•
Flash memory: 128 MB (onboard flash)
•
System memory: 512 MB (DDR3)
Memory
•
Lamp post mount kit
•
Wall mount kit
•
H-frame mount kit
Rack-mount options
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
72 OL-29732-01
Specifications and Part Numbers
Product Specifications
REVIEW DRAFT - CISCO CONFIDENTIAL