User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
•
DC-input voltage rating: 24 VDC, -48 VDC, -60 VDC
•
DC-input current rating: 2.8 A maximum
DC power rating
•
DC connector (AMPHENOL ELVP03100)
•
AC connector (AIR-PWR-ST-LT-R3P=)
Power connector
Table 8: Environmental Specifications
SpecificationsDescription
-40 to 149°F (-40 to 65°C); optics used may limit the temperature rangeOperating temperature
-40 to 158°F (-40 to 70°C)
-40 to 113°F (-40 to +45°C) with solar loading
Nonoperating temperature
10% to 85%, noncondensing, ±5 %Relative humidity
13,000 ft (4000m) maximum 104°F (40°C) ambientOperational altitude
Table 9: Safety and Compliance
StandardsType
•
UL/CSA 60950-1
•
IEC/EN 60950-1
•
IEC/EN 60950-22
•
AS/NZS 60950.1
Safety
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
74 OL-29732-01
Specifications and Part Numbers
Product Specifications
REVIEW DRAFT - CISCO CONFIDENTIAL