User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
•
GR-1244-CORE
•
ITU-T G.813
•
ITU-T G.703 clause 5
•
ITU-T G.703 clause 9
•
ITU-T G.8261/Y.1361
•
ITU-T G.781
•
ITU-T G.8264
•
IEEE1588-2008
Network synchronization
DSPR Technical Requirement 2005
•
IEEE 802.3
•
IEEE 802.3ae
DSPR Technical Condition 2004
•
IEEE-802.3ah
•
ANSI X3.263-1995
•
ISO/IEC 9314-3
•
Ethernet
◦
1000Base-T
100Base-T
◦
100Base-FX
◦
1000Base-S
◦
1000BaseL
◦
1000Base-Z
◦
1000Base-E
◦
1000Base-BX-U
◦
1000Base-BX-D
◦
DWDM-SFP-GE:
◦
CWDM-SFP-GE:
◦
10000Base-S
◦
10000Base-L
◦
10000Base-Z
◦
10000Base-E
Antenna Specifications
The following table lists the technical information for the Wi-Fi antenna supported on the Cisco ASR 901S
Series Aggregation Services Router.
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
76 OL-29732-01
Specifications and Part Numbers
Antenna Specifications
REVIEW DRAFT - CISCO CONFIDENTIAL