User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
Table 10: Wi-Fi Antenna Specifications
Wi-Fi Antenna (Omnidirectional)Specification
DipoleType
OutdoorEnvironment
3.7 in. (9.3 cm)Height
1.0 in. (2.5 cm)Width
2400-2500 MHzOperating frequency range
50 OhmCharacteristic impedance
1.7:1 MaxVSWR
3 dBi TYP, 3.4 dBi PeakGain
•
Linear
•
Vertical
Polarization
N-Type (Male)Connector
-40 to 158°F (-40 to 70°C)Operating temperature
YesDC ground
10 W (average)Maximum input power
RoHSCompliance
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
OL-29732-01 77
Specifications and Part Numbers
Antenna Specifications
REVIEW DRAFT - CISCO CONFIDENTIAL