User Guide

7-9
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-21881-03
Chapter 7 Configuring Multiple SSIDs
Configuring Multiple Basic SSIDs
Figure 7-1 Global SSID Manager Page
Step 2
Enter the SSID name in the SSID field.
Step 3 Use the VLAN drop-down menu to select the VLAN to which the SSID is assigned.
Step 4 Select the radio interfaces on which the SSID is enabled. The SSID remains inactive until you enable it
for a radio interface.
Step 5 Enter a Network ID for the SSID in the Network ID field.
Step 6 Assign authentication, authenticated key management, and accounting settings to the SSID in the
Authentication Settings, Authenticated Key Management, and Accounting Settings sections of the page.
BSSIDs support all the authentication types that are supported on SSIDs.