User's Manual

21
Figure 4 Low Power Mode Warning
Step 5 Set the power settings and power injector fields, and verify your switch status as shown in
Table 3.
Note To verify switch status, you need to use the switch CLI. See the Cisco IOS software
configuration guide for your switch.
Table 3 System Power Settings
Power Source System Power Settings Switch Status
Cisco PSE supporting Cisco Intelligent
Power Management feature
1
Power Settings: Power Negotiation
selected
Power Injector: Unchecked
power inline auto
Cisco PSE not supporting Cisco
Intelligent Power Management
feature
1
Power Settings: Prestandard
Compatibility selected
Power Injector: Unchecked
power inline auto
Cisco Aironet Power Injector with a
Cisco PSE supporting Intelligent
Power Management feature
1
Power Settings: Power Negotiation
selected
Power Injector: Unchecked
power inline never
Cisco Aironet Power Injector with a
Cisco PSE not supporting Cisco
Intelligent Power Management
feature
1
Power Settings: Power Negotiation
selected
Power Injector: Checked
MAC address
2
power inline never
Cisco Aironet Power Injector with a
non-Cisco switch
No configuration requirement