User Manual

26
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuring the Module
Step 3: Configuring Dialer Parameters
Use the dialer commands to configure dialer parameters:
Router(config)# interface dialer 1
Router(config-if)# dialer pool 1
Router(config-if)# dialer string
<chat-script name>
Router(config-if)# dialer persistent
Router(config-if)# no shutdown
Note To unconfigure dialer persistent, you must delete the profile by using the command, cellular 3/1 gsm
profile delete 1.
Step 4: Configuring Cellular Parameters
Use the dialer pool-member command to configure cellular parameters:
Router(config)# interface cellular 3/1
Router(config-if)# dialer pool-member 1
Step 5: Saving Configuration
Use the shutdown and no shutdown commands to save configuration on the interface:
Router(config)# interface cellular 3/1
Router(config-if)# shutdown
Router(config-if)# no shutdown
GSM Unconfiguration
All commands, except dialer persistent, can be unconfigured with the no option. The dialer persistent
profile must be deleted with the command, cellular 3/1 gsm profile delete 1.
See also Step 3: Configuring Dialer Parameters, page 26.
Configuring the CDMA Module
Step 1: Configuring a Chat Script
Use the chat-script command to configure a GSM chat script:
Router(config)# chat-script <chat-script name> ATDT#777
Step 2: Configuring Dialer Parameters
Use the dialer commands to configure dialer parameters:
Router(config)# interface dialer 1
Router(config-if)# dialer pool 1
Router(config-if)# dialer string
<chat-script name>
Router(config-if)# dialer persistent
Router(config-if)# no shutdown