User Manual

28
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuring the Module
Modem Firmware Version = T1_0_3_2AP R361 CNSZXD00000061 2011/04/15 17:40:48
Modem Firmware Built = 04/15/11
Modem Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 0123456063
International Mobile Equipment Identity (IMEI) = 353567040032469
<-- Unique identifier for module
Factory Serial Number (FSN) = CC3291006141001
Modem status = Online
Current Modem Temperature = 33 deg C
Current Temperature State = Normal
Profile Information
===================
--- Profile 1 details ---
Status = Activated
Default: Yes
PDP Type: IPv4
Profile IP: 192.0.2.0
<-- Profile details stored on the modem
Profile APN: isp.cingular
Authentication: CHAP
Profile UserName:
Profile Password:
Data Connection Information
===========================
Data Transmitted = -1603896208 bytes
Data Received = 208880986 bytes
Profile 1, Packet Session Status = ACTIVATED
<-- State of the connection
Network Information
===================
Modem status = Online
Service status = Normal
Service type = Combined
Country Initials = 1
Network name =
MCC = 1, MNC = 1
<-- Mobile country code, mobile network code
Location Area Code (LAC) = 128
Routing Area Code (RAC) = 0
Cell ID = 1
Primary Scrambling Code = 100
PLMN Selection = Automatic
Radio Information
=================
Current band = WCDMA_I_IMT2000
<-- Current band/channel/RSSI
Radio power mode = On
Channel number = 10563
Band selected = Auto
Current RSSI = -56 dBm
Band Information
================
Number of bands: 5
<-- Bands supported by the modem are listed below