User Manual

29
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuring the Module
Band 1: GSM EGSM DCS
Band 2: Unknown Band Group
Band 3: GSM ALL
Band 4: Unknown Band Group
Band 5: AUTO BAND
show cellular 3/1 all (CDMA Module)
Shows consolidated information about the modem, profiles created, radio signal strength, network
security, and so on.
Note The RSSI should be better than -90 dBm for steady and reliable connection.
Router# show cellular 3/1 all
Hardware Information
====================
Modem Firmware Version = p2813301
Modem Firmware Built = 06-24-10
Modem Hardware Version = MC5728V Rev 1.0
International Mobile Subscriber Identity (IMSI) = 5555550032
Electronic Serial Number (ESN) = 60D22706
<-- Unique identifier for module
Modem status = Online
Current Modem Temperature = 31 deg C
Current Temperature State = Normal
Profile Information
===================
Electronic Serial Number (ESN) = 60D22706
<-- Unique identifier for module
Activation Status = active
Activation Date = 20110925
Phone Number (MDN) = 5555550213
Number of data profiles configured: 1
Current Active Data Profile: 1
NAI (Network Access Identifier) = [e-mail]
MN-HA SS = enabled
MN-HA SPI = 300
MN-AAA SS = enabled
MN-AAA SPI = 2
Reverse Tunneling Preference = enabled
Home Address = 0.0.0.0
Primary Home Agent Address = 255.255.255.255
Secondary Home Agent Address = 255.255.255.255
Data Connection Information
===========================
Phone Number of outgoing call = 5555550213
Data Transmitted = 14041 bytes
Data Received = 14041 bytes
Network Information
===================