User Manual

30
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuring the Module
Current Roaming Status = Not Roaming
Current Idle Digital Mode = No Service
Current System Identifier (SID) = 40
Current System Identifier (NID) = 0
Serving Base Station Longitude = 0 deg 0 min 0 sec
Serving Base Station Latitude = 0 deg 0 min 0 sec
Radio Information
=================
Current band = CDMA_CLASS1,CDMA_CLASS1
<-- Current band/channel/RSSI
Radio power mode = On
Channel number = 548
Current RSSI = -82 dBm
Data Account Provisioning
Note For the Cisco Connected Grid 3G Module, the numbering is 3/1 for all commands.
Note To provision your modem, you must have an active wireless account with a service provider and a SIM
card installed.
To provision your data account, see the following topics:
• Verifying Signal Strength and Service Availability, page 30
• Activating the Module Using OTASP (CDMA Module), page 31
Verifying Signal Strength and Service Availability
To verify the signal strength and service availability on your modem, use the following commands in
privileged EXEC mode. See also show Commands, page 27.
• show cellular3/1 network
• show cellular 3/1 radio
• show cellular 3/1 profile
• show cellular 3/1 all
• show cellular 3/1 led