User Manual

33
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuration Example
Router(config)# interface cellular 3/1
Router(config-if)# shutdown
Router(config-if)# no shutdown
Configuring WAN Backhaul Redundancy
For information on configuring WAN backhaul redundancy, see Cisco 1000 Series Connected Grid
Routers Unicast Routing Software Configuration Guide.
Configuration Example
The following example shows a configuration that includes information on TACACS+ security, OSPF
(Open Shortest Path First), OSPF v3, DHCP (Dynamic Host Configuration Protocol), DHCP v6, a
tunnel, virtual tunnel, QoS, Internet Protocol Security (IPSec), a static IP address when a tunnel interface
(3/1) is configured, the interfaces (Ethernet, serial, cellular, WPAN, and WiFi), dialer, and chat script.
Router# show running-configuration
!Command: show running-config
!Time: Sun Aug 14 00:36:25 2011
version 5.2(1)
hostname Router
vdc Router id 1
limit-resource vlan minimum 16 maximum 4094
limit-resource vrf minimum 2 maximum 4096
limit-resource port-channel minimum 0 maximum 768
limit-resource u4route-mem minimum 9 maximum 9
limit-resource u6route-mem minimum 24 maximum 24
limit-resource m4route-mem minimum 58 maximum 58
limit-resource m6route-mem minimum 8 maximum 8
feature privilege
feature tacacs+
feature crypto ike
crypto ike domain ipsec
policy 10
group 1
lifetime seconds 660
identity hostname
feature ospf
feature ospfv3
feature dhcp
feature tunnel
feature crypto ipsec virtual-tunnel
feature dhcpv6
feature ppp
username adminbackup password 5 ! role network-operator
username admin password 5 $1$fMmnWu6t$Aawk/sH5wmErCjCwnxeyb. role network-admin
enable secret 5 $1$454cdd6$a08d10dc3fdb2f6f
no password strength-check
ip domain-lookup
tacacs-server host 4.4.4.5 key 7 "fewhg"
aaa group server tacacs+ tactical
server 4.4.4.5