User Manual
Table Of Contents
- Cisco Connected Grid 3G Module Installation and Configuration Guide
- Kit Contents
- Features
- Hardware Overview
- Front Panel
- Ports and LEDs
- Supported Cisco Antennas
- Supported Cisco Cables
- 3G Module Models
- Interfaces
- Radio Frequency Interface
- Environmental Specifications
- Power Specifications
- Modem
- GSM Module SIM Interface
- Voltage Monitoring State Machine
- Temperature Monitoring State Machine
- Data Rates
- USB Interface
- Memory Specifications
- Module Power States
- Installing and Removing the SIM Card (GSM Module)
- Installing and Removing the 3G Module
- Regulatory and Compliance Information
- Software Overview
- Configuring the Module
- Configuration Example
- Additional References
- Technical Assistance
- Troubleshooting and Diagnostics
35
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Configuration Example
interface Tunnel1
ipv6 address 2001:b:b:bc::1/64
ipv6 mld join-group ff38:40:2011:dead:beef:cafe:0:1
ipv6 router ospfv3 1 area 0.0.0.0
tunnel source Tunnel0
tunnel destination 4.0.0.2
no shutdown
ipv6 dhcp relay destination 2001:a:b:c::100
interface Tunnel5
no shutdown
interface Ethernet2/1
mac-address 0022.bde0.3201
ip address 2.12.54.10/16
no shutdown
interface Ethernet2/2
mtu 1496
mac-address 0022.bde0.3202
ip address 172.27.161.54/25
ipv6 address 2001:dead:beef:cafe::2/64
no shutdown
interface Ethernet2/3
mtu 1496
mac-address 0022.bde0.3203
interface Ethernet2/4
mtu 1496
mac-address 0022.bde0.3204
interface Ethernet2/5
mtu 1496
mac-address 0022.bde0.3205
interface Ethernet2/6
mtu 1496
mac-address 0022.bde0.3206
interface Ethernet2/7
mtu 1496
mac-address 0022.bde0.3207
interface Ethernet2/8
mtu 1496
mac-address 0022.bde0.3208
no shutdown
interface serial1/1
physical-layer async
interface serial1/2
physical-layer async
interface cellular3/1
no shutdown
encapsulation ppp
dialer pool-member 1
interface wimax5/1
shutdown
no description