User Manual
Table Of Contents
- Cisco Connected Grid 3G Module Installation and Configuration Guide
- Kit Contents
- Features
- Hardware Overview
- Front Panel
- Ports and LEDs
- Supported Cisco Antennas
- Supported Cisco Cables
- 3G Module Models
- Interfaces
- Radio Frequency Interface
- Environmental Specifications
- Power Specifications
- Modem
- GSM Module SIM Interface
- Voltage Monitoring State Machine
- Temperature Monitoring State Machine
- Data Rates
- USB Interface
- Memory Specifications
- Module Power States
- Installing and Removing the SIM Card (GSM Module)
- Installing and Removing the 3G Module
- Regulatory and Compliance Information
- Software Overview
- Configuring the Module
- Configuration Example
- Additional References
- Technical Assistance
- Troubleshooting and Diagnostics
7
Cisco Connected Grid 3G Module Installation and Configuration Guide
OL-25991-01
Hardware Overview
Ports and LEDs
Figure 3 shows the LEDs of the Cisco Connected Grid 3G Module.
Figure 3 2G/3G Connected Grid Module LEDs
1 WWAN LED 2 RSSI LED
3 SVC LED 4 GPS LED (not used)
5 SIM1 LED (for GSM verision) 6 SIM2 LED (for GSM verision)
284023
AUX
MAIN
RSVD
WWAN RSSI
SVC GPS
SIM1 SIM2
TEXT DIRECTION
WWAN RSSI
SVC GPS
SIM1
SIM2
1 3 5
2 4 6