User's Manual

DEC. 2011—EFT REVIEW DRAFT—CISCO CONFIDENTIAL
2-7
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-12345-01
Chapter 2 Router Hardware Description
Router Overview
Figure 2-5 Router Left Side Exterior
Table 2-4 Router Left Side Exterior Features
Description Detailed Information
1 Mounting bracket connectors (4) Mount supported brackets to the router using these connectors. For information
about router mounting options and procedures, see the chapter
Mounting the Router.
2 SD flash memory module port Remove the plug shown here for access to the router SD module, which is described
in the
SD Flash Memory Module, page 2-16, later in this chapter. For detailed
information about using an SD flash memory module with the router, see the chapter
Using the SD Flash Memory Module.
Note When a mounting bracket is installed on the router, the bracket blocks
access to the SD card port. In order to access the port after the bracket is
installed, you must remove the router from the pole, and rotate the bracket
away from the port. For detailed instructions,
1
2