User's Manual

DEC. 2011—EFT REVIEW DRAFT—CISCO CONFIDENTIAL
2-9
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-12345-01
Chapter 2 Router Hardware Description
Router Overview
Figure 2-7 Router Base Exterior
Table 2-6 Router Base Exterior Features
Description Detailed Information
1 Antenna connectors (4) Install supported integrated or external antennas in these ports. For detailed information about
the router antennas and information about installation instructions, see the chapter
About
Router Antennas.
2 Cable ports (7) Use a cable glands to thread network cables through these ports when installing the router.
Unused ports are sealed with standard, environmental-proof plugs. For detailed descriptions
of supported cable glands and plugs, see
Chassis Cable Ports, page 2-13.
3 Port plugs (up to 7) Use port plugs to seal unused cable ports and protect the router interior from environmental
elements. For a detailed description of supported plugs, see
Chassis Cable Ports, page 2-13.
4 AC power connector Connect the router AC power connector to a power source to power on the router. For detailed
information about the connecting the router to the AC power supply, see
AC Power Supply,
page 2-17.
5 100BASE-T Fast
Ethernet (FE) port
Use this connector to connect the router to a 100BASE-T Ethernet network without requiring
access to the router interior. This port is connected to one of the router internal FE ports. For
detailed information on connecting the router to an Ethernet network, see to
Installing the
Router.
4
6
5
7
3
2
1