User's Manual

CHAPTER
DEC. 2011—EFT REVIEW DRAFT—CISCO CONFIDENTIAL
4-1
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-12345-01
4
Mounting the Router
This chapter describes the safety information, equipment, and procedures required to mount the Cisco
1240 Connected Grid Router on a vertical pole or streetlight. This chapter contains these sections
• Overview of the Pole Mount Kits, page 4-1
• General Safety Information for Mounting, page 4-2
• Contents of the Mounting Kits, page 4-2
• Materials and Tools You Supply, page 4-6
• Mounting Instructions, page 4-6
• Grounding Instructions, page 4-18
Overview of the Pole Mount Kits
You will need some or all of the kits described in this section to install the router on a pole. Your
installation environment and requirements determine the kits you need.
The Contents of the Mounting Kits section includes a detailed description of each kit.
:
Cisco Part Number Name Description
CGR-PMK1000 Pole Mount Kit This kit is required for all pole or streetlight installations
and includes a mounting plate and the hardware required
to attach the mounting plate to a pole.
CGR-PMK-BAND Mounting
Bracket Kit
Use this kit if your installation requires a Cisco mounting
bracket to mount the router. This kit is used with the pole
kit and includes the hardware required to attach the
mounting bracket to the mounting plate.
CGR-PMK-BAND Band Strap Kit This kit includes two steel straps for mounting the router
on poles larger than 5
inches (14 cm) in diameter. This kit
is used together with the
Pole Mount Kit. A Band-It Tool
is required to install the steel straps on a pole.
AIR-BAND-INST-TL= Strap Tool Kit This kit includes a Band-It tool that is required when using
steel straps to install the router on poles larger than