User's Manual

DEC. 2011—EFT REVIEW DRAFT—CISCO CONFIDENTIAL
4-9
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-12345-01
Chapter 4 Mounting the Router
Mounting Instructions
Step 9 Use a socket wrench to evenly tighten all four carriage bolts to finish installing the mounting plate on
the pole.
Figure 4-7 Mounting Plate Installed on Pole with Clamp Brackets
Install the Mounting Plate—Poles Larger than 5 Inches in Diameter
To install the mounting plate on a vertical pole that is larger than 5 inches (12.7 cm) in diameter, follow
these steps and refer to
Figure 4-8.
Item Description
1 Pole clamp notch
2 Carriage bolts (4)
3 Pole clamps (2)