User's Manual

DEC. 2011—EFT REVIEW DRAFT—CISCO CONFIDENTIAL
6-7
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-01
Chapter 6 Installing the Router
Basic Hardware Installation
Power and Reset Buttons
There are two reset buttons inside the router chassis (Figure 6-6):
• POWER Reset—Pressing the Power button power cycles the router hardware without powering
down the router. The router continues to operate during this process.
• CONFIG Reset—Pressing the Reset button restores the router software configuration the factory
default and power cycles the router hardware.
Accessing the Buttons
You must provide a pin, paper clip, or other thin metal tool to access and press these buttons.
Related Information
For detailed instructions for opening chassis door, see the chapter Opening the Router Chassis.
Figure 6-6 Router Power and Reset Buttons
Item Description
1 CONFIG Reset button
2 PWR Reset button
1
2