User Guide
5-36
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter 5 Parameters and Defaults
Optional Feature Parameters
Voice Configuration Menu Access Code
81
RingOnOffTime
Description
This parameter specifies the ringer cadence pattern, expressed as a triplet of integers “a,b, and c”.
• a—Number of seconds to turn the ring ON.
• b—Number of seconds to turn the ring OFF.
• c—The ring frequency, fixed at 25.
Value Type
List of three integer values, separated by commas
Range
1-65535
Default
2, 4, 25
Recommended Values:
• United States —2,4,25
• Sweden — 1,5,25
Voice Configuration Menu Access Code
929
IPDialPlan
Description
This parameter allows for detection of IP-like destination address in DialPlan. Three values are valid:
• 0—String is dialed as is and not treated as an IP address.
• 1—When the Cisco ATA detects two asterisks (**), IPDialPlan takes over. The user enters the pound
(#) key to terminate the digit collection, and the interdigit timeout default is not used.
• 2—When IPDialPlan is set to 2, three asterisks (***) are required for IPDialPlan to take effect.
All other values are currently undefined.
Value Type
Integer
Range
0, 1 or 2