User Guide
5-43
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter 5 Parameters and Defaults
Optional Feature Parameters
The following settings are recommended for Sweden:
• DialTone = "1,30959,0,4253,0, 1, 0, 0,1500" (approximately -5 dBm)
• BusyTone = "1,30959,0,2392,0, 0, 2000, 2000,0" (approximately -10 dBm)
• ReorderTone = "1,30959,0,2392,0, 0, 2000, 6000,0" (approximately -10 dBm)
• RingBackTone = "1,30959,0,2392,0, 0, 8000, 40000,0" (approximately -10 dBm)
• CallWaitTone = "1,30959,0,2392,0, 0, 1600, 4000,11200" (approximately -10 dBm)
• AlertTone = "1,30959,0,2392,0, 0, 480, 480,1920" (approximately -10 dBm)
Specific Call-Progress Tone Parameter Information
Brief descriptions, and lists of default values and the voice configuration menu code for each Cisco ATA
tone parameter, are described in the following sections:
• DialTone, page 5-43
• BusyTone, page 5-44
• ReorderTone, page 5-44
• RingbackTone, page 5-45
• CallWaitTone, page 5-45
• AlertTone, page 5-46
DialTone
Description
The Cisco ATA plays the dial tone when it is ready to accept the first digit of a remote address to make
an outgoing call.
Default values for the nine-integer array
• ntone—2
• freq0—31538
• freq1—30831
• level0—1380
• level1—1740
• steady—1
• on-time—0
• off-time—0
• total time to play tone—1000
Voice Configuration Menu Access Code
920