User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
156 Part #40-00047-00 Rev D v1.0
February 28, 2003
2.602 - 2.686 GHz Filter component of the RFS.
CAUTION: Changing an MMDS BTS center
frequency may result in destruction of the PA’s.
Diagnostics
Field Name Values Description
Enable Const Display
True
or False Determines if the BTS Constellation Display application
can be logged into and used on this BTS. If set to True,
this BTS can be logged into and its Constellation Display
viewed.
Max Beamform Displays
0-9 The maximum number of CPE’s that can be viewed
simultaneously using the BTS Beamforming diagnostic
display.
User Name
ems Authorized user of all diagnostic tools.
Password
The password used to authenticate the login to all
diagnostic tools.
Enable Spec Analyzer
Display
True or False
Determines if the BTS Spectrum Analyzer (frequency)
application can be logged into and used on this BTS.
Confirm Password
Confirms that the correct password is entered.
Performance
Field Name Values Description
Perf Log Server IP
Address
IP address of the performance log collection server.
Perf Log Storage
Directory
The name of the directory at the Performance Log server
where the performance logs are to be sent. Note: The
location of the log directory is “<ftp root directory>/<pm
data directory>”. Example: If the FTP root directory is set
to “d:/naviniems/ftp” and the pm data directory is set to
“performance”, the location of the log directory will be
“d:/naviniems/ftp/performance”. Therefore, when
configuring the FTP Daemon, set the FTP root directory
to “<ems install directory>/ftp”.
Upload Interval (minutes
or hours)
Disable, 15 minutes, 30
minutes, 1 hour, 2
hours, etc.
The interval that the BTS uploads performance data to the
EMS.
Collection Interval
(minutes or hours)
Disable, 15 minutes, 30
minutes, 1 hour
The interval that the BTS collects the performance logs.
Perf Log FTP User
Name
The FTP user name set in the FTP Daemon running on
the server where performance logs are captured.
Perf Log FTP Password
The FTP password set in the FTP Daemon running on the
server capturing performance logs.
Confirm Password
Re-enter password to confirm authorized access.