User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
60 Part #40-00047-00 Rev D v1.0
February 28, 2003
Figure 30: Declination Angle
Verify the Downtilt
Using an inclinometer, check the downtilt of the RFS antenna. If required, adjust the angle using
the downtilt adjustment brackets. Be sure to include any electrical uptilt or downtilt built into the
antenna in the setting.
Tighten the mounting hardware to secure the RFS in the proper position. Recheck the downtilt
angle again to verify proper position. Repeat the procedure for all other antennas that are
installed in the system. Ensure that they are mounted in the proper direction and with the correct
downtilt angle.