User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev D v1.0 165
February 28, 2003
Gamma Value
1 Used to specify the number of consecutive valid ICP
cells to be detected before moving to the IMA sync state
from the IMA pre-sync state.
Index
IMA group 2 IMA Group 1 or 2. Unique sequence number of the IMA
group.
Min Num Tx Links
1
Minimum number of Transmission links that have to be
active for the IMA group to be active.
Ne Tx Clk Mode
ITC
Near-end Transmit clock mode.
Tx Frame Length
M128
Length of IMA frame being transmitted. It is defined as
M consecutive cells.
Beta Value
2 Used to specify the number of consecutive ICP cells with
errors to be detected before moving to the IMA hunt state
from the IMA sync state.
Add T1’s to IMA Groups
IMA Group T1’s Associated With this IMA Group Notes
IMA 1
IMA 2
ATM
Field Name Values Description
If Index
T1-1
(first T1 ID) Interface (IF) Index associated with this ATM interface.
Max Vccs
1001 Maximum Virtual Channel Circuits for this interface.
Max Active Vci Bits
9 The number of bits for Virtual Channel Identifier (VCI).
Determines the maximum VCI value allowed for this
interface. The Max Value is calculated by 2^ (max active
vci bits).
Max Vpcs
0 Maximum Virtual Private Circuits for this interface.
Max Active Vpi Bits
3 The number of bits for Virtual Private Identifier.
Determines the maximum VPI value allowed for this
interface. The max value is calculated by 2^ (max active
vpi bits).
PVC
Field Name Values Description
if Index
T1-1 The ATM IF index that this PVC is associated with.
Vpi (start and end)
0 Virtual Path Identifier. The VPI + VCI are in the cell
header and identify the next destination of a cell as it
passes through a series of ATM switches.
Vci (start and end)
0
Virtual Channel Identifier. The VPI + VCI are in the cell
header and identify the next destination of a cell as it
passes through a series of ATM switches.
Tr/Re Traffic Descr
Indexes
2 Index of the ATM Descriptor that applies to this PVC.
The Transmit and Receive Descriptors are the same.
AAL5 CPCS Tx SDU
Size (Byte)
1528 The maximum AAL5 CPCS SDU size, in bytes, that is
supported in the Transmit direction.