User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
166 Part #40-00047-00 Rev D v1.0
February 28, 2003
AAL5 CPCS Rx SDU
Size (Byte)
1528 The maximum AAL5 CPCS SDU size, in bytes, that is
supported in the Receive direction.
Admin Status
Up Up or Down. The administrative (operational) state of the
PVC. If it is Down, this PVC may not be used for traffic.
AAL Type
AAL5 (1-5) The type of ATM Adaptation Layer (AAL) used on this
PVC: AAL1, AAL2, AAL3, AAL4, or AAL5.
AAL5 Encap Type
LLC encapsulation The type of data encapsulation used over the AAL5
SSCS layer.
Cast Type
P2P The connection topology type.
Conn Kind
PVC The type of VCL. This is always PVC.
Assign CPE to PVC
Field Name Values Description
PVC
T1-1-1-100 (example) Identifies the PVC to be assigned to the specified CPE.
CPE
0 CPE assigned to specified PVC.
Data
Denotes what type of PVC to assign.
**********
CPE Configuration Data Form
Company:__________________________________________________________
Your Name:______________________________________Date:______________
NOTE 1: Field Values in gray rows indicate data that ordinarily should not be changed or that is populated
automatically by the system.
NOTE 2: Default Field Values are underlined.
Add CPE
Field Name Values Description
EID (hex)
0
Equipment Identifier unique to each CPE. This value is
determined during the manufacturing process and is
displayed on the case of the CPE hardware, as well as
entered and displayed as a hexadecimal number in this
field.
Descriptor Name
CPE Descriptor-1
The name of the CPE Descriptor to be used with this
CPE. The CPE Descriptor level affects Quality-of-
Service (QoS) for this CPE’s data packets.
Collect Perf Data
True
True or False. Collect Performance Data. If True, this
CPE sends performance metrics to the BTS at the set
interval. The BTS then uploads the performance data to
the EMS at set intervals. The interval setting for
collection and upload from the BTS to the EMS is set in
the Performance fields for the BTS.
Nomadic
Disabled
Enabled or Disabled. If Enabled, this CPE can access any
BTS in the network that is defined in its Available Home