User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
168 Part #40-00047-00 Rev D v1.0
February 28, 2003
**********
EMS Configuration Data Form
(To configure EMS Servers & Clients in the Ripwave System)
Company:__________________________________________________________
Your Name:______________________________________ Date:_____________
NOTE 1: Field Values in gray rows indicate data that ordinarily should not be changed or that is populated
automatically by the system.
NOTE 2: Default Field Values are underlined.
Field Name Values Description
EMS Id
Unique identifier for this EMS.
Alarm AutoAck
True
True or False. If True, the EMS will automatically
acknowledge all alarms except alarms with a severity
level of Warning (blue). An Alarm Engineer will only
see current alarms on the system. However, all alarm
activity is logged to an alarm file.
Server Ip Address
IP address of the EMS Server.
Database Schema
Version
01 (example) Version of the EMS server database schema.
Mib Version
1.19.01 (example) Version of the BTS Management Information Base
(MIB).
BTS/CPE SW Directory
loads (example) Directory where BTS and CPE software loads are stored.
Used by the EMS to obtain the location of the software
loads during downloads. Copy BTS and CPE software
loads to this directory during initial installations or
upgrades. Otherwise, the EMS cannot download the
software to the BTS. This field is used in conjunction
with the FTP Server Root Path field by the EMS to
obtain the software loads. The full path the EMS searches
for software loads is <FTP Server Root Path>\<BTS/CPE
SW Directory>. Example - C:\naviniems\ftp\loads.
FTP Server Root Path
The Root directory where BTS and CPE software loads
are stored. This field must match what is configured in
the FTP Daemon. Otherwise, the EMS will not be able to
download BTS and CPE software loads to the BTS. This
path is used by the EMS to obtain the location of the
software loads during downloads. Copy BTS and CPE
software loads to this root directory during initial
installations or upgrades. This field is used in conjunction
with the BTS/CPE SW Directory field by the EMS to
obtain the software loads. The full path the EMS searches
for software loads is <FTP Server Root Path>\<BTS/CPE
SW Directory>. Example - C:\naviniems\ftp\loads.
Network ID
Unique identifier for this Service Provider’s wireless
network. Intended to ensure other Service Providers’
CPE’s cannot operate in the identified network. A CPE
with a different BTS network ID cannot be
p
rovided