User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
172 Part #40-00047-00 Rev D v1.0
February 28, 2003
DHCP Relay
Field Name Values Description
Relay Config Enabled
(Checkbox) Enable or Disable. Clicking on the checkbox enables the
DHCP Relay feature.
Free Address Low Agent
Threshold
80
Free Address High Agent
Threshold
100
Relay Config MaxDhcp
Size
1488
Option 82 Tagging
(Checkbox) Enable or Disable. Clicking on the checkbox enables the
inclusion of one or more of the following Relay
Information sub-options.
Remote Id
(Checkbox) If checked (enabled), include the CPE’s EID as the
Remote ID Relay Information sub-option. It will be
formatted as a 6 octet string “0000<EID>”. This format
is often used in cable modem scenarios.
Circuit Id
(Checkbox) If checked (enabled), include the BTS’s ID as the Circuit
ID Relay Information sub-option. It will be formatted as
a 4-octet string “<BTS ID>”. This format is often used
in cable modem scenarios.
VPN Id
(Checkbox) If checked (enabled), include the CPE’s EID as the VPN
ID Relay Information sub-option. It will be formatted as
a text string “navini<EID>”. This format is often used in
DSL scenarios.
Subnet Selection/Addr
(Checkbox) If checked (enabled), include the specified Subnet
Address as the Subnet Selection Relay Information sub-
option.
DOCSIS Device/Class
(Checkbox) If checked (enabled), include the specified DOCSIS
Device Class as the DOCSIS Device Relay Information
sub-option.
ARP Proxy
Field Name Values Description
ARP Ingress Proxy
(Checkbox) If clicked, this enables the BTS to respond to ARP
messages coming from the CPE's/Modems to the BTS.
ARP Egress Proxy
(Checkbox) If clicked, this enables the BTS to respond to ARP
messages coming from the network (backhaul) to the
BTS on behalf of the CPE's/Modems.