User's Manual

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev D v1.0 51
February 28, 2003
Install Chassis
The BTS chassis may be one of two types: Combo Chassis or Split Chassis. Prior to Ripwave
Release 1.19, only the Combo Chassis was used (Figure 18). The advantage of the Split Chassis
has to do with improved RF power output (Figure 19). The Split Chassis is available for the 2.3,
2.5, and 2.6 GHz systems; it is not available for the 2.4 GHz system.
Install the BTS chassis in the mounting rack using ten (10) screws.
Figure 18: BTS Chassis
Combo Chassis Split Chassis
Panel separates
RF and Digital
shelves
Combo Chassis Split Chassis
Panel separates
RF and Digital
shelves