User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
98 Part #40-00047-00 Rev D v1.0
February 28, 2003
Step 8. The Full Calibration window appears during system calibration (Figure 50). When
calibration is complete, the Full Calibration window changes and displays the finish
time and the result. Click the Close button to close the Full Calibration window. Note
that the result of “Done” does not mean that the system passed calibration.
Figure 50: Full Calibration Window
Step 9. Click Show Configuration and select the Antenna Table tab (Figure 51). Check the Tx
Gain and Rx Gain columns (the last two columns in the table) for transmit and receive
results. The transmit and receive results for all eight antennas must be between 1 and
254. The eight values in each column should be relatively close to each other. A value
of zero indicates a problem with the associated antenna path.
Figure 51: Show Configuration/Antenna Table