User's Manual

Ripwave Base Station I&C Guide Navini Networks, Inc.
36 Part #40-00047-00 Rev D v1.0
February 28, 2003
Materials Specifications
The Base Station installation requires general materials and parts for installation. In Table 6 is a
partial list of the items that may be used for a typical installation of the Ripwave Base Station. A
more complete list is provided in
Appendix O. The quantity and use of materials will vary
depending on the specific installation. The lists in Table 6 and in Appendix O are based on a
150-foot site.
Table 6: Materials Specifications
Base Station General Materials Requirements List
BTS Install Kit 96-05000-00 Description Supplier Rqd Qty
GROUNDING
Lightning Rod Lightning Rod - 8' MTS
Ground Rod Tinned copper ground rod, 5/8" x 8' MTS
Ground Wire # 2 Stranded green ground wire MTS 50 Ft
Ground Wire # 6 AWG Stranded Green Wire LOCKE 50 Ft
Ground Buss Bar (Tower) Ground buss bar kit, 1/4" x 2-1/2" x 12-1/2" MTS 1 Kit
Ground Buss Bar (Shelter) Copper Gnd buss bar, 1/4" x 4", drilled to 5/8" ALT 1 Kit
Ground Lug #6, One Hole T&B 3 Pcs
Ground Lug #6, Two Hole T&B 6 Pcs
Ground Lug #2, Two Hole T&B 2 Pcs
Grounding Kit (1/2"), LMR600 STD Ground kit, LMR-600, 5' x 3/8" 2 hole lug MTS 27 Kits
Grounding Kit (3/8"), LMR400 STD Ground kit, LMR-400, 5' x 3/8" 2 hole lug MTS 2 Kits
Grounding Kit (1/2"), RF-1/2" Ground Kit, RF-1/2", 2 hole lug
N
K Cables
Universal Grounding kits Universal grounding kit, 3' with 3/8" 2 hole lug MTS
ANTENNA SYSTEM
RFS Antenna Omni Antenna
N
avini
RFS Surge Protector RFS surge protector POLYPHASER 9 Pcs
RFS Antenna Mount Omni Antenna Mount MTS 1 Kit
Weatherproofing kits Universal weatherproofing kit, Large MTS 2 Kits
RFS Antenna Power Cable RFFE Power/Data Main Cable assembly Probity 1 Kit
RFS Antenna Jumper Cable RFFE Power/Data Jumper cable, 10 Feet. Probity 1 Kit
Mounting Clamps Crossover Clamp, 1.5" x 3.5" OD MTS 1 Kit
Mounting Clamps Pipe to pipe clamps, kit of 2 MTS 1 Kit
MAIN FEEDER
RFS Cable LMR 600, 1/2" coaxial cable HUTTON/TIMES 1350 Ft
RFS Type N Male Connectors EZ600 N type, Male connectors HUTTON/TIMES 36 Pcs
Hoisting Grips Pre-laced Hoisting Grip, 1/2" MTS 10 Pcs
Cushion Hangers 1/2" Cushion hanger assembly, 5H, 1/2", kit of 5 MTS 12 kits
Cushion Hangers 3/8" Cushion hanger assembly, 6H, 3/8" for LMR400 MTS
Angle Adapter Adapter, Galvanized, Angle kit of 10 MTS
Cross Cushion Hanger Mounts Cross cushion hanger mount, kit of 5 MTS 6 Kits
Universal Hanger 1/2" Hanger, Universal, Snap-In, 1/2", kit of 10
N
K Cables
Support Blocks Mini Coax Support Blocks, kit of 10 MTS 2 Kits
RFS Connector
MALE, N TYPE, 3/8 INCH
N
K Cables
RFS Connector
MALE, N TYPE, 5/8 INCH
N
K Cables
RFS Connector
MALE, N TYPE, 1/2 INCH
N
K Cables
RFS Connector
MALE, N TYPE, 7/8 INCH
N
K Cables