User's Manual

Chapter 2 Installation
REVIE W DRAFT — CISC O C O NFIDENTIA L
Figure 2-1 Top portion of the Moutning Kit
• Alternatively, you can also mark the holes using the template markings as shown in “Template for
the Drilling Hole” in Figure 2-2.
Figure 2-2 Template for the Drilling Hole
Step 2 Drill 12 mm diameter for the depth of 55 mm holes at the marked position.
Step 3 Insert all 4 anchor bolts one-by-one and slightly hammer to drive anchor into the drilled holes. Fix the
top portion of the mounting kit and tighten the screws using the wrench/heavy duty screwdriver. See
“Fixing of the Anchor Bolts” in Figure 2-3.
Figure 2-3 Fixing of the Anchor Bolts
2-2