User's Manual

Chapter 2 Installation
R E VIEW DR AFT — CISC O C O NFIDE N TIAL
Step 4 To connect all the cables, draw all the cables that are mentioned in “List of CEED 3700 Package Items”
through the pipe and pull them towards the top portion of the mounting kit. See Figure 2-4.
Note Ensure that respective end of cables pass through the mounting kit from the bottom.
Figure 2-4 Cable Connections through the Mounting Kit
Step 5 Insert bottom portion of mounting kit to top portion of the mounting kit as shown in “Alignment of the
Top Portion and the Bottom Portion of the Mounting Kit”.
Step 6 Adjust the length of the vertical slider so that the base of the CEED 3700 is above 6 feet from the ground.
2-3