User's Manual

Chapter 2 Installation
REVIE W DRAFT — CISC O C O NFIDENTIA L
Figure 2-7 CEED 3700 Placement
Step 10 Complete set up looks as shown in
Accessories, Peripherals and Cable Assembly
This section describes the external wiring, all cable connections, positioning of the accessories and their
connections and contains the following section:
• External Wiring and Placement of Accessories, page 2-6
• Assembling of the Accessories, page 2-8
External Wiring and Placement of Accessories
To connect and place all the accessories, peripherals and cables that are coming out of the CEED
3700 device, perform the following steps:
Note: The accessories and peripherals should be kept outside the test chamber/room using the extension cables while
performing any compliance test.
Step 1 To connect accessories such as camera, microphone, keyboard, mouse and speaker follow the “CEED
3700 External Cable Connections” in Figure 2-9.
2-6