User's Manual

REVIE W

DRAFT —

CISC

NFIDENTIAL

Assembling of the Accessories

This section describes how to connect camera, microphone and speakers to CEED 3700.

VGA

Connect the VGA cable to the CEED back panel VGA port. Refer number 1 in

Figure

2-9

Camera

To connect the camera 1 and camera 2 to the CEED 3700 back panel, perform the following steps:

Step 1 Connect the Camera 1 and Camera 2 to Active USB extension cable. Refer number 3 and number 4 in

Figure 2-9 for connection.

Step 2 Insert the USB extension cable in the USB port in the CEED 3700 back panel as shown in Figure 2-9

Step 3 Place the camera in the appropriate position.

Step 4 Secure the camera position with appropriate nuts, bolts and screws.

Speakers

To connect the speakers to the

CEED 3700

back panel, perform the following

steps:

Step 1 Connect the speakers to the audio extension cable.Refer number 8 and number 9 as shown in Figure 2-9.

Step 2 Insert the audio extension cables in Audio port (Lime Color).

Step 3 Place the speakers at a suitable height on the wall for the sound to be audible as shown in Figure 2-9.

Note that the height will differ at each site.

Step 4 Secure the speakers with appropriate brackets and screws.

Step 5 Connect the speakers to the power outlet.

Note The power cord provided with the speakers in the CEED 3700 package items are to be used only in India.

For other countries use your respective adapters/converters for the power cord.

2-8