User's Manual

REVIEW DRAFT — CISC O C O NFIDENTIAL
A
C H A P T E R 4
Configuring CEED 3700 Software
This chapter describes how to configure the CEED 3700 software, first time login and subsequent login
sessions using the CEED 3700. This configuration is a one-time process to be performed during the first
time login only.
Note The following sections assumes that you have removed the plastic sheet covering the back panel of the
CEED 3700 and CEED 3700 powered on.
First Time Log in
To complete the configuration of CEED 3700, perform the following steps after you first login.
Step 1 After you power on the setup screen will appear as shown in “Setup Screen” figure Figure 4-1
Figure 4-1 Setup Screen
Step 2 Wait for 20-30 seconds for the setup process screen to appear as shown in “Setup Process” in Figure 4-2
Figure 4-2 Setup Process
Step 3 Once the system has installed the required devices 100%, Windows 7 professional license starts its
installation process. The windows 7 licence screen as appears.
4-1