User's Manual

R E VIEW DR AFT — CISC O C O NFIDE N TIAL
C H A P T E R 6
Configuring the Router
This chapter describes how to configure the router for the CEED 3700. This chapter contains the
following:
• Configuring WAN
• Configuring 3G
• Configuring Wi-Fi
• Powering Down/Shutting Down the CEED 3700
This chapter assumes that the following prerequisites have been completed.
• At least 1 Mbps Internet Leased Line with Static Public IP for WAN interface is available.
• The Internet link should have an Ethernet hand-off.
Configuring WAN
To configure the WAN in the router, perform the following steps:
Step 1 Connect RJ45 cable from the modem to the CEED 3700 WAN port in CEED 3700 back panel.
Step 2 Connect RJ 45 cable provided with the CEED 3700 package item from LAN1 port in the back panel to
the LAN A port. See CEED 3700 Back Panel in Figure 6-1.
6-1