User's Manual

Chapter 6 Configuring the Router
Powering Down/Shutting Down the CEED 3700
R E VIEW DR AFT — CISC O C O NFIDE N TIAL
REVIE W DRAFT — CISC O C O NFIDENTIA L
Step 6 Click on Join. This will start the WebEx session for attendee.
Note: If this is the first time WebEx is running on your computer, you will be prompted to install
the WebEx software via ActiveX. Install it.
Step 7 A pop up to Join the Integrated Voice Conference appears. Click on Yes.
Step 8 Turn on the video by clicking the video icon
Note: This document is grounded on WebEx Meeting center. If WebEx Training center is used, the only
change would be to click on Training center instead of Meeting center (wherever applicable).
Verification of the Accessories
To verify the accessories (Camera/Microphone) perform the following steps:
Step 1 Microphone 1 and 2 on CEED 3700 is audible on the speakers. Both microphones are tested for its
individual effect.
a. If the microphone is not audible, make sure you have selected the right microphone.
b. Click Audio from the menu bar, choose the appropriate microphone from the drop-down menu to
make the microphone audible.
If the above steps does not seem to work, troubleshoot with the following tasks.
c. Click windows Start button. Choose Control Panel.
Adjust your computer settings window appears.
d. Click Hardware and Sound.
e. From the list, click Sound.
A sound dialog box appears
f. From the playback tab, choose the appropriate output and click OK.
g. From the Microphone tab, choose the appropriate Microphone output and click OK.
Step 2 Verify the camera image is visible on the training screen (projection screen) of CEED 3700 device.
Step 3 Change the camera as shown in the figure below to test the second camera from CEED 3700. To change
of camera view, perform the following steps:
a. Click Set Video Options in the participants bar as shown in “Set Video Options” in Figure 7-4
7-4