User Guide

14-14
User Guide for Cisco Unified Operations Manager
OL-10041-01
Chapter 14 Using Notifications
Configuring Notifications
Step 3 Edit the information on the page, described in the following table.
GUI Element Description/Action
Notification Criterion field Enter a name for the notification criterion.
Destination fields (Optional). To generate notifications for alerts and events on call
destinations, do the following:
1. Select an operator (Is Exactly, Contains, Begins With, Any).
2. Enter an appropriate value: Phone extension or IP address for an
endpoint, such as a voice gateway or a phone.
Source fields (Optional). To generate notifications for alerts and events on call sources,
do the following:
1. Select an operator (Is Exactly, Contains, Begins With, Any).
2. Enter an appropriate value: Phone extension or IP address for a voice
gateway or a phone.
Cisco 1040 ID fields (Optional). To generate notifications for alerts and events on particular
Cisco 1040s, do the following:
1. Select an operator (Is Exactly, Contains, Begins With, Any).
2. Enter the ID for a Cisco 1040. These typically start with a letter
followed by 3 digits, for example A100.
Phone Model list (Optional). To generate notifications for alerts and events on particular
phone models, enter a comma-separated list of Cisco IP phone models or
select them from a list:
1. Click the icon to open a selector.
2. Select a phone model from the list. To select more than one phone
model, hold down Ctrl while selecting.
3. Click OK.
Alert Severity check boxes Select any:
• Critical.
• Warning.
• Informational.
Alert Status check boxes Select any:
• Active.
• Cleared.
Event Severity check boxes Select any:
• Critical.
• Warning.
• Informational.