Network Router User Manual

4025083 Rev A 79
Monitor Gateway Status
Section
Field Description
Upstream channel ID
Displays the upstream channel ID. Click Submit to set the
Upstream channel ID.
Frequency Start Value
This field allows you to modify the frequency at which the cable
modem starts its scan during installation and registration. Enter
the new start frequency and restart the modem.
Click the large button available in this section to restart your
cable modem.
Upstream Channel Setting
This field allows you to modify the channel that the cable
modem will use. Enter the new channel and restart the modem.
Click the large button available in this section to restart your
cable modem.
Status > DOCSIS Log
Important: This page is only visible until the gateway goes online. After the gateway
is online and registered on the network, this page is no longer visible.
The Status DOCSIS Log page allows you to view the DOCSIS log.
DOCSIS Log Page Description
Use the descriptions in the following table to review the items shown in the DOCSIS
Log page.
Section
Field Description
DOCSIS Log
Time
Displays the time of the event.
ID
Displays a unique numeric value assigned to the event.