Network Router User Manual

4025083 Rev A 99
Configure Applications and Gaming
Applications & Gaming > QoS
Quality of Service (QoS) ensures better service to high-priority types of network
traffic, which may involve demanding, real-time applications, such as video
conferencing. QoS settings allow you to specify priorities for different types of
traffic. Lower priority traffic will be slowed down to allow greater throughput or
less delay for high priority traffic.
Use the following table to configure the port range triggering for the residential
gateway. Select enable for each feature you want to enable. After you make your
selections, click Save Settings to apply your changes or Cancel Changes to cancel.
Section
Field Description
Quality of Service
(QoS)
Wireless
WMM Support
Allows you to enable or disable Wi-Fi Multimedia (WMM)
support. WMM support is enabled by default. If WMM is also
supported by your wireless clients, then voice and multimedia
traffic will be given higher priority than other traffic
No ACK
Allows you to enable or disable No ACK. No ACK is enabled
by default. This setting is recommended for voice, for which
speed of transmission is important and packet loss is tolerable
to a certain degree. If you select Disable, an acknowledge
packet is returned for every packet received. This provides a
more reliable transmission, but it increases traffic load, which
decreases performance.