Telephone Accessories User Manual

write TCP err : 13 −33
[0:0]Rel LBRC Res
Q931<−*:ReleaseComplete
!−−− ATA side hangs up the call.
write TCP err : 12 −33
GK<−0: DRQ:0
!−−− Disconnect request sent by ATA.
SCC:ev=13[0:0] 4 0
[0:0]SCC: Disconnected
GK−>0: DCF
!−−− Disconnect confirm received.
SCC−>(0 0) <cmd 1>
[0]MPT mode 0
No Dial Tone ATA Debug Example
Both voice ports need a unique E.164 address, otherwise the ATA receives a Reject from the gatekeeper.
During this time, you will see the ATA 186 being registered with one voice port as an H.323 terminal, but
there will be no dial tone.
K<−0: GRQ
BMK : gk2
GK−>0: GCF:GK@0xac100d0c−1719
BMK : gk2
Secured RRQ
GK<−0: RRQ
GK−>0:RRJ: reason 4
NetPro Discussion Forums − Featured Conversations
Networking Professionals Connection is a forum for networking professionals to share questions, suggestions,
and information about networking solutions, products, and technologies. The featured links are some of the
most recent conversations available in this technology.
NetPro Discussion Forums − Featured Conversations for Voice
Service Providers: Voice over IP
Voice & Video: Voice over IP
Voice & Video: IP Telephony
Voice & Video: IP Phone Services for End Users
Voice & Video: Unified Communications
Voice & Video: IP Phone Services for Developers
Voice & Video: General
Related Information
Cisco ATA 186 Basic Configuration•
Configuring and Troubleshooting an ATA 186 with a Cisco IOS Gateway•
Cisco High−Performance Gatekeeper − Configuring the Gatekeeper•