Telephone Accessories User Manual

destination−pattern 300.
session target ras
!−−− Dial−peer to send the calls to ATA.
!
Adding Security
As of ATA software release 2.12, the options in this section are available to add security.
Authenticate the Endpoint at the Gatekeeper with an H.323 ID
Follow these steps to configure the ATA 186 to register with the H.323 ID:
Set the AutMethod field to 0 (the default is 1).
The hexadecimal value that is to be configured for this field is 0x0.
1.
Set the UseLoginID field to 1.2.
Configure LoginID0 and LoginID1, with the H.323 IDs for the ATA 186.
The ATA 186 registers as two different H.323 terminals, one for each port.
3.
This is a sample working configuration for the gatekeeper when using ATA with the H.323 ID authentication
method:
2610−Gatekeeper
aaa authentication login default local
aaa authentication login cisco none