Telephone Accessories User Manual

aaa authentication login h323 local
aaa session−id common
enable password ww
!
username atagw1
!−−− Same as the LoginID0 and LoginID1 fields.
username atagw2
username 3640
!−−− Same as the H.323 ID configured on the gateway.
!
gatekeeper
zone local gk2 cisco.com 172.16.13.12
security any
!−−− Register after the H.323 ID or E.164 address is authenticated.
no shutdown
!
Authenticate the Endpoint at the Gatekeeper with an E.164 Address
Follow these steps to configure the ATA 186 to register with the E.164 address:
Set the AutMethod field to 0 (the default is 1).
The hexadecimal value that is to be configured for this field is 0x0.
1.
Set the UseLoginID field to 0.
The ATA uses the UID0 and UID1 fields to get authenticated by the gatekeeper.
2.
This is a sample working configuration for the gatekeeper and gateway when using ATA with the E.164 ID
authentication method:
2610−Gatekeeper
aaa authentication login default local
aaa authentication login cisco none
aaa authentication login h323 local
aaa session−id common
enable password ww
!
username 3001
!−−− Same as the UID0.
username 3000
!−−− Same as the UID1.
!
gatekeeper
zone local gk2 cisco.com 172.16.13.12
security any
!−−− Register after the H.323 ID or E.164 address is authenticated.
no shutdown
!