Wireless IP Phone Quick Start Guide

ManualsBrandsCisco Systems ManualsCordless TelephoneCisco Unified Wireless IP Phone 7920

Cisco 7920 Wireless IP Phone Quick Start Guide

Cisco IP 7920 Wireless User Guide Version 1.0 Page 1

Quick Start Guide - Cisco 7920 Wireless IP Handset

What Is In This Document?

This document contains basic user information for the Cisco 7920 Wireless IP

phones.

The document is not intended as an exhaustive technical guide, rather is user

orientated and covers common tasks and questions.

Cisco 7920 Wireless IP Phone

Summary of content (5 pages)

PAGE 1
Cisco 7920 Wireless IP Phone Quick Start Guide Quick Start Guide - Cisco 7920 Wireless IP Handset What Is In This Document? This document contains basic user information for the Cisco 7920 Wireless IP phones. The document is not intended as an exhaustive technical guide, rather is user orientated and covers common tasks and questions. Cisco 7920 Wireless IP Phone Cisco IP 7920 Wireless User Guide Version 1.
PAGE 2
Cisco 7920 Wireless IP Phone Quick Start Guide Phone Basics Feature Left Soft Key-Activates the item in the label above the soft key. Right Soft Key-Activates the item in the label above the soft key 1. Answer/Send Key-Answers a call or dials a number 2. 3. 4. * Number Keys (0-9) – Use these to enter numbers and characters. Number Keys (2-9) – Use these to activate speed dial hot keys. Asterisk Key – Toggles between Ring and Vibrate mode. Toggles between upper and lower case.
PAGE 3
Cisco 7920 Wireless IP Phone Quick Start Guide Basic Call Functions Feature Function Placing a Call Dial ‘0’ to get a line out 1. Dial the phone number 2. Press the (green key) to place your call Note: there is no dial tone Answer a Call 1. Press and release incoming call (green key) to connect to the Place a call while another call is active (using the same line) 1. Press Hold 2. Press or to display New Call 3.
PAGE 4
Cisco 7920 Wireless IP Phone Quick Start Guide Feature Function Put a call on hold 1. Make sure the call you want to put on hold is highlighted. 2. Press Hold Remove a call from on hold Move a call on a shared line between your wireless phone and your desk phone 1. Make sure the appropriate call is highlighted 2. Press Resume 1. From your phone with the active call, press Hold 2.
PAGE 5
Cisco 7920 Wireless IP Phone Quick Start Guide Adjusting Phone Settings Feature Function Adjusting the Speaker Volume 1. Choose Menu > Profiles > User Profile, then select the active profile 2. Scroll to Speaker Volume and select it 3. Press to increase the volume or to decrease the volume 4. Press back to make the change Change the ring volume 1. Choose Menu > Profiles > User Profile, then select the active profile 2. Scroll to and select Ring Volume 3.