User's Manual

•
••
•the Cisco UC
Phone 7925G Desktop Charger must be connected to an electrical
outlet or have a charged spare battery installed.
•
••
•
the phone should be already paired with the charger.
Procedure
Step 1
Place the phone into the charger, using the following diagram.
Diagram to be added after it is created.
When the phone docks and pairing has been set up, the Power LED flashes blue.
While the Power LED flashes blue, the phone and Cisco Unified Wireless IP Phone
7925G Desktop Charger are pairing. When pairing completes, the Phone LED lights
solid blue.
If you
are on a call when you dock the phone,
•
••
•If the Cisco UC
slight delay and then the call continues using the Cisco U
Desktop Charger speaker phone.
•
••
•If the Cisco UC
Phone 7925G Desktop Cha
from an electrical output or a spare battery), the call disconnects.
Change charger speaker volume
Step 1
Use the volume keys on the phone to raise or lower the speaker volume.
Phone 7925G Desktop Charger must be connected to an electrical
outlet or have a charged spare battery installed.
the phone should be already paired with the charger.
Place the phone into the charger, using the following diagram.
Diagram to be added after it is created.
When the phone docks and pairing has been set up, the Power LED flashes blue.
While the Power LED flashes blue, the phone and Cisco Unified Wireless IP Phone
7925G Desktop Charger are pairing. When pairing completes, the Phone LED lights
are on a call when you dock the phone,
Phone 7925G Desktop Charger is powered, there is be a
slight delay and then the call continues using the Cisco U
C
Desktop Charger speaker phone.
Phone 7925G Desktop Cha
rger does not have power (either
from an electrical output or a spare battery), the call disconnects.
Change charger speaker volume
Use the volume keys on the phone to raise or lower the speaker volume.
Phone 7925G Desktop Charger must be connected to an electrical
When the phone docks and pairing has been set up, the Power LED flashes blue.
While the Power LED flashes blue, the phone and Cisco Unified Wireless IP Phone
7925G Desktop Charger are pairing. When pairing completes, the Phone LED lights
Phone 7925G Desktop Charger is powered, there is be a
C
Phone 7925G
rger does not have power (either
from an electrical output or a spare battery), the call disconnects.
Use the volume keys on the phone to raise or lower the speaker volume.