User's Manual

Charge spare battery
Use this procedure to
install a spare battery so that it can be recharged. After
becoming fully charged, the spare battery can be used as a power source (for a
limited time) for the Cisco U
Prerequisites
•
••
•The Cisco UC
Phone 7925G Desktop Charger must be plugged into the electrical
outlet.
Procedure
Step 1
Use the following diagram to insert the spare battery into the Cisco U
7925G Desktop Charger.
Diagram to be added -
for the moment, just understand that the
battery faces up.
The Battery LED lights green if the battery is charged, or red if the battery is charging.
Cisco UC
Phone 7925G Desktop Charger notes
Unplugging the Cisco UC
Phone 7925G Desktop Charger from the electrical outlet has
the following consequences:
•
••
•
As long as a charged spare battery is in place, the station functions normally.
–
When the Battery LED lights amber
low. Active calls continue and new calls can be placed, as long as t
sufficient power in the spare battery.
–
When the Battery LED lights amber
has dropped too low. Active calls disconnect and new calls cannot be placed.
The Cisco UC
Phone 7925G Desktop Charger should be con
electrical outlet or a charged spare battery installed.
install a spare battery so that it can be recharged. After
becoming fully charged, the spare battery can be used as a power source (for a
limited time) for the Cisco U
C Phone 7925G Desktop Charger.
Phone 7925G Desktop Charger must be plugged into the electrical
Use the following diagram to insert the spare battery into the Cisco U
for the moment, just understand that the
printed side of the
The Battery LED lights green if the battery is charged, or red if the battery is charging.
Phone 7925G Desktop Charger notes
Phone 7925G Desktop Charger from the electrical outlet has
the following consequences:
As long as a charged spare battery is in place, the station functions normally.
When the Battery LED lights amber
-
yellow, the charge on the spare battery is
low. Active calls continue and new calls can be placed, as long as t
sufficient power in the spare battery.
When the Battery LED lights amber
-
yellow and dims, the spare battery charge
has dropped too low. Active calls disconnect and new calls cannot be placed.
Phone 7925G Desktop Charger should be con
nected to an
electrical outlet or a charged spare battery installed.
install a spare battery so that it can be recharged. After
becoming fully charged, the spare battery can be used as a power source (for a
Phone 7925G Desktop Charger must be plugged into the electrical
Use the following diagram to insert the spare battery into the Cisco U
C Phone
printed side of the
The Battery LED lights green if the battery is charged, or red if the battery is charging.
Phone 7925G Desktop Charger from the electrical outlet has
As long as a charged spare battery is in place, the station functions normally.
yellow, the charge on the spare battery is
low. Active calls continue and new calls can be placed, as long as t
here is
yellow and dims, the spare battery charge
has dropped too low. Active calls disconnect and new calls cannot be placed.
nected to an