User's Manual

•
••
•
If an uncharged spare battery is in place, the station does not function. The Cisco
UC
Phone 7925G Desktop Charger must be plugged into an electrical output, or a
charged spare battery
installed.
Troubleshooting Cisco U
This section provides information to help you troubleshoot Cisco U
Desktop Charger problems.
Power LED
This section describes situations that are identified by the
circumstances, the Power LED lights green which indicates that the Cisco U
7925G Desktop Charger is plugged into line power.
Power LED unlit
Problem
The Power LED is unlit.
Cause
The Cisco UC
Phone 7925G Desktop Charger
Battery LED is also unlit, you cannot use the Cisco U
Solution
Plug the charger into line power.
Power LED
Power LED flashes blue
Problem
The Power LED is flashing blue.
Cause
The Cisco UC
Phone 7925G Desktop Charger is entering or leaving Bluetooth pairing
mode.
Solution
This is normal, and the flashing LED should turn solid blue in a few seconds.
Battery LED
This section describes situations that are identified by the Battery LED.
If an uncharged spare battery is in place, the station does not function. The Cisco
Phone 7925G Desktop Charger must be plugged into an electrical output, or a
installed.
Troubleshooting Cisco U
C
Phone 7925G Desktop Charger problems
This section provides information to help you troubleshoot Cisco U
C
Phone 7925G
Desktop Charger problems.
This section describes situations that are identified by the
Power LED. Under normal
circumstances, the Power LED lights green which indicates that the Cisco U
7925G Desktop Charger is plugged into line power.
Phone 7925G Desktop Charger
is not plugged into line power. If the
Battery LED is also unlit, you cannot use the Cisco U
C
Phone 7925G Desktop Charger.
Plug the charger into line power.
The Power LED is flashing blue.
Phone 7925G Desktop Charger is entering or leaving Bluetooth pairing
This is normal, and the flashing LED should turn solid blue in a few seconds.
This section describes situations that are identified by the Battery LED.
If an uncharged spare battery is in place, the station does not function. The Cisco
Phone 7925G Desktop Charger must be plugged into an electrical output, or a
Phone 7925G Desktop Charger problems
Phone 7925G
Power LED. Under normal
circumstances, the Power LED lights green which indicates that the Cisco U
C Phone
is not plugged into line power. If the
Phone 7925G Desktop Charger.
Phone 7925G Desktop Charger is entering or leaving Bluetooth pairing
This is normal, and the flashing LED should turn solid blue in a few seconds.
This section describes situations that are identified by the Battery LED.
When the