User's Manual

Chapter 2 Installing the DOCSIS Wireless Residential Voice Gateway

32 OL-29163-01 Rev A

 Evaluate and certify the integrity of the coax cable plant between MoCA nodes.

 Identify sources of noise and interference on the MoCA spectrum.

 Re-qualify additional coax outlets to support MoCA-enabled devices and

services.

Pre-Installation Procedure

Prior to installing MoCA, complete the following tasks:

1 Contact your service provider and ensure that the wireless residential gateway is

enabled for MoCA services.

2 Ensure that a MoCA filter has been has been installed by your service provider at

the home’s entry point, as shown in the following illustration:

3 Log-in to your residential gateway’s user interface from any browser using the

4 From the menu options in the user interface go to Gateway/Connections/MoCA

and ensure that the MoCA is set to enable.

5 If you have not already done so, connect the coaxial cable from a wall cable

outlet within the home network to the MoCA/Cable port on the rear panel of

your residential gateway.