User's Manual

Chapter 2

Initial Installation

This Chapter covers the physical installation of the device.

Procedure

1. Connect the supplied power adapter to the device.

2. Connect the router to the WAN(PoE) port on the device.

3. Plug the power supply into the main socket.

4. The green light will stop flashing when the device is read to use. It may take a few

minutes to complete the process. If the green light does not stop flashing after 30 minutes,

please call the operator for help.

Wall Mounting

The device can be either placed on a table using the stand provided or mounted on the wall.

1. Mark four points where you would like to mount the device.

2. Screw in 2/3 of the length of the mounting screws into the wall.

3. Hook the mounting holes located at the bottom of the device into the mounting screws.

4. Make sure the device is firmly fixed on the wall.