User's Manual

AT&T 3G MicroCell User Guide | Getting Started
8 9
Proceed to Step 2 if you completed online activation at the AT&T store.
Visit att.com/3GMicroCell, click “Activate”, and follow the instructions
on the screen.
You’ll need the following
• Serial Number (S/N)–it’s on the bottom of the device or the box label.
• Your AT&T wireless phone number/user name or AT&T Access ID, as well as your
password.
• If you haven’t set up an AT&T online wireless account, you’ll need to do so.
STEP 1
Activate your device online
NOTE
:
Hold on to this manual; you’ll come back to it after you activate your device.
www
STEP 2
Connect your device to the Internet
Connect the yellow Ethernet cable
from the “Ethernet” port on your
MicroCell to your modem or router.
PLACEMENT TIPS
Your MicroCell works best within three feet of a window and not in
a basement or closet.
You will improve the chances of receiving a GPS signal when you install your MicroCell:
• On first floor or above basement level.
• Next to a window with a clear, unobstructed view of the sky.
• At least one foot away from other wireless broadcasting devices.
• When the weather is clear (no clouds or rain).
E911 SERVICE
The location address you provide during online activation is sent to local emergency
responders and must be kept up to date if you move your device. To update your
location address information, visit att.com/3GMicroCell and manage your settings.