User's Manual

ManualsBrandsCisco Systems ManualsElectronicsDesktop Telepresence Device

Front View and Home Screen

Rear View

Cisco DX70 Quick Reference Guide

Draft 2014.02.14

REVIEW DRAFT—CISCO CONFIDENTIAL

1. USB ports

2. HDMI sockets (future use)

3. Connect your PC LAN here to let your DX70

and PC share a common LAN connection

4. LAN connection

5. Power supply socket.

Phone Only Mode

Standard Mode

Show Self View

Tap the Settings icon ( )

in the

upper right corner and

select Self view from the menu.

Forward All Calls

1. Tap the Settings icon ( )

in the upper right corner and

select Forward all calls.

2. You will be prompted to specify a target phone number.

3. To cancel Forward all calls, repeat the process.

Turn On Do Not Disturb

Tap the Settings icon ( )

in the upper right corner and

select Do not disturb. Available only when feature has been

activated by your Administrator.

Mute a Call

Press the Microphone mute button on the right side of the

system. To unmute a call, press again.

Stop Your Video Transmission

Turn the camera shutter counter-clockwise. To resume

video transmission, turn shutter clockwise.

Voicemail

The Message Waiting Icon (MWI) light indicates that you

have a new voice message.

To view your voice messages:

1. Tap Recents.

2. Tap Call voicemail.

Play voice message:

Tap Play.

If your system operates in Standard Mode, you must

start the Phone App to use the system as a phone.

To start the Phone App tap the Phone icon (

)

in the

left corner of the black bottom bar. The Phone icon is

shown in Standard Mode only.

The usual Android navigation buttons (Back, Home

and Recently Used Apps)will be shown when the

Phone App is running.

Note! The descriptions provided in this document

assume that the system either is in Phone Only Mode

or that the Phone Application is running.

Place calls

Access your list of Contacts

Display the list of Recent calls

Display any Voice Mail (Messages)

View PC (if applicable)

Display the Settings menu

(icon in upper right corner).

If your system operates in Phone Only Mode

(modes are set up by your Administrator), the

following functions are available:

Camera with privacy shutter, turn counter-clockwise to

shut and clockwise to open

Microphone mute button and loudspeaker volume

controls

SD card slot and connectors for headset and USB.

Loudspeaker

Power On/O.

EFT DRAFT - CISCO CONFIDENTIAL

DO NOT DISTRIBUTE

Summary of content (2 pages)

PAGE 1
EFT DRAFT - CISCO CONFIDENTIAL Front View and Home Screen Cisco DX70 Quick Reference Guide Phone Only Mode If your system operates in Phone Only Mode (modes are set up by your Administrator), the following functions are available: DO NOT DISTRIBUTE Show Self View Tap the Settings icon ( ) in the upper right corner and select Self view from the menu.
PAGE 2
Place a Call Create a Conference Transfer a Call Place a Call on Hold 1. Tap Calls as shown. 1. From a call, tap Add. 1. From a call, tap Transfer. An active call goes on hold whenever you pick up an incoming or held call, start a new call, initiate a transfer or a conference. You may also deliberately put a call on hold: 2. Tap the Search or call field at the top. This will cause the virtual keyboard to appear. 2. Tap the Search or call to add field.